PLB HDPE Ducts BSNL GR- GR/CDS-08/02
CONSTRUCTION :
VIJAYA POLYMERS Permanently Lubricated HDPE Ducts are formed by co extrusion technique and are used for laying Optical Fiber Cables as under ground ducting / conduits.
We have been offering a wide range of HDPE PLB Duct Pipes and Fittings such as pipe conduits, pipe ducts, HDPE Conduits, PLB HDPE Ducts, that are manufactured from virgin Quality Raw Material sourced from reliable vendors across the globe. These pipe conduits, pipe ducts, HDPE conduits, PLB HDPE Ducts are manufactured as per the various Indian as well as International standards or can be customized as per the specifications of our clients.
MATERIAL :
The base raw material being used for the manufacturing Permanently Lubricated Ducts is High Density Poly Ethylene. The grade of raw material is ultra violet grade and is confirming to IS:7328-1992 & IS : 2523 or ISO : 1183 & ISO : 1133 and is designated as PEELA-50T-012 (CACT Approved) and inner layer permanently lubricated material DOW CORNING grade-50MB002.
APPLICATIONS :
Telecommunication, Computer Network, Automatic Signaling, Railways Information Network. Highways, Cable Service Providers, Broad Band networks, Electric cable installation etc.
ADVANTAGES :
Reduction of stress on cable during installation.
Installation of Longer lengths made feasible.
Negotiations of cable movement through bends and deflections are easier.
Reduction of number of joints and minimizes number of splices.
Faster and easy installation of cable with lesser man power.
Reduction of overall cost of installation, maintenance and future upgrades.
Retains it's properties throughout it's life.
Existing cables can be deployed after de-blowing from the duct.
This does not have toxic and dermatic hazards and is safe handling.
ASSOCIATED ACCESSORIES & TOOLS :
- Plastic Coupler : To join two duct lengths- air tight and water tight.
- End Plug : To seal duct ends prior to the installation of the cable.
- Cable Sealing Plug : To seal duct ends after insertion of the cable
- End Cap : Made of hard rubber, fitted on both ends of duct coil after manufacturing.
- Duct Cutter : To cut duct cleanly and with square ends.
- C Spanner : To tighten plastic coupler.
HDPE PLB Duct are designed and engineered to house the sensitive nerves of Information technology i.e. optical fibers thus enabling information transfer across the globe. Available as per Indian, International Standards or Customers requirements Most Suited for Pulling Optical Fibre Cable (OFC), Telecom, Electrical Lines etc.
Features
Environment Stress Crack Resistance (ESCR)
Impact Resistance
Crush Resistance
Low Coefficient of Friction
Temperature Resistance
Ultraviolet (UV) protection
Color: Orange, Green, Brown, Blue, Black or as per Customers requirements. Available in Coils upto 1000 Meters Length.
Available as per TEC Specifications or Customers requirements
Material : Permanently lubricated HPDE Telecom Ducts are manufactured with the superior grade of High-Density Polyethylene materials. HDPE pipes manufactured meets all the requirements of TEC Specifications as well as IS 4984-1995.
Lubrication : Permanently lubricated HDPE Telecom Ducts have special lubricated compound on Inner Side for Conveying Optical Fiber cables with extremely low friction. Coefficient of Friction between the inside of the HDPE Duct and the outside of the inserted communication cable does not exceed 0.06. Properties of Lubricant are Its strongly locked into HDPE. It has same physical/mechanical properties as HDPE except low Coefficient of Friction value which is less than 0.06. Its evenly distributed around the bore and along the length of duct. Does not react with water, hence it is possible to clean the duct by water stream in case of any obstruction/accident. Have same frictional properties during life of the duct.